Seasonal & Outdoor · Explainer

How to Measure a Dog for a Coat, Sweater or Harness

The short version

  • Most dog clothing charts need three numbers: back length, chest girth and neck girth. Chest girth is usually the most important [1].
  • Measure with your dog standing naturally, and leave room for two fingers under the tape on every girth [1].
  • If your dog is between sizes, choose the larger one [1].
  • Sizing differs by brand and even by style, so compare your numbers with each product's own chart, not a general size name [1].
  • A coat should let your dog walk, run and play comfortably, and should not be so loose it could tangle [2].
  • For a harness, chest girth and neck girth matter most; measure the neck where it meets the shoulders [1][4].
  • Deep-chested and wide-chested breeds need two checks: size by chest girth, then confirm the back length or waist on the brand's chart [6][7][8].
  • A short-haired dog's coat should cover from the base of the tail to the belly, the ASPCA suggests [5].
A tape measure on a wooden table

Why measure first

Breed names and weight are poor guides to coat size. The AKC says sizing differs by brand and even by style within a brand, so the same dog can be a Medium in one coat and a Large in another [1]. The brands in our roundups say the same: Kuoser and Spark Paws both tell buyers to measure and size up if in doubt, and the Carhartt chore coat lists overlapping chest ranges across sizes.

The payoff is fit. The AKC says a dog should be able to walk, run and play comfortably in a jacket, and that it should not be so loose it could tangle [2]. Five minutes with a tape measure avoids a return.

The three measurements

The AKC says most dog clothing needs three numbers: back length, chest girth and neck girth, and that chest girth is usually the most important [1]. Take them in this order, with your dog standing naturally on a flat floor [1].

  1. Chest girth: wrap the tape around the widest part of the rib cage, usually just behind the front legs, keeping it level and close [1].
  2. Back length: run the tape along the spine from the base of the neck, where the collar sits, to the base of the tail [1].
  3. Neck girth: wrap the tape around the base of the neck, where a collar normally sits [1].
  4. On each girth, leave room for two fingers under the tape [1].
  5. Write all three down, then compare them with the chart for the coat you want [1].

No tape measure? The AKC suggests a piece of string or a shoelace: wrap it, mark it, then lay it against a ruler [1].

Chest girth

Chest girth is the number most charts lead with, and the AKC calls it usually the most important [1]. Find the widest part of the rib cage, which is usually just behind the front legs, and keep the tape level all the way around and snug against the coat without squeezing [1].

Then apply the two-finger rule: you should be able to slide two fingers between the tape and your dog [1]. That built-in slack is why you should not pull the tape tight, and why a coat sized to a tight measurement ends up restricting the shoulders.

Some makers only size by this one number. IECOii, for example, sizes its harness coat by chest girth rather than breed or weight, and Carhartt lists each size as a chest range.

Back length and belly cut-outs

Back length runs along the spine from the base of the neck, where the collar sits, to the base of the tail [1]. Keep the tape on the spine rather than following the curve of the side, and stop at the tail base, not the tip.

This number decides how much of your dog the coat covers. The ASPCA suggests that a sweater or coat for a short-haired dog cover from the base of the tail to the belly, with a high collar or turtleneck [5]. The AKC adds a practical note for male dogs: a coat without a belly cut-out may need a shorter underside to avoid soiling [1]. Sanitary cut-outs are on the AKC's list of features to look for [2].

Neck

Neck girth goes around the base of the neck, where a collar sits [1]. The two-finger rule applies here too [1]. On a pullover sweater with no closures, the neck opening also has to go over the head, so a snug neck measurement matters more than it does on a coat that opens flat and closes with straps.

If the coat has a turtleneck or high collar, which the ASPCA suggests for short-haired dogs [5], check that the collar height does not push into the ears or jaw when your dog looks down.

Between sizes and brand charts

When your dog falls between two sizes, the AKC says to choose the larger [1]. The brands agree: Kuoser and Spark Paws both tell buyers to size up if in doubt.

Compare your numbers with each product's own chart, not with the size you bought last time. The AKC says sizing differs by brand and even by style [1]. Two of the coats we looked at show why: Carhartt lists its Large as a 25 to 38 inch chest and its Extra Large as 30 to 45 inches, so a 32-inch chest fits both ranges on paper, and the Kuoser chart lives in the listing images rather than the text.

If you are shopping for one of our picks, see our dog winter coat guide for insulated and waterproof coats and our dog sweater guide for lighter layers. If your dog wears a harness under its coat, measure for the harness separately; our no-pull harness guide covers that.

Fit check and introducing the coat

When the coat arrives, put it on indoors and watch your dog move. The AKC says the dog should be able to walk, run and play comfortably, and the coat should not be so loose it could tangle [2]. Check that the leg openings do not rub, the collar does not ride up over the ears, and the belly strap or underside does not interfere with going to the bathroom.

Introduce it gradually and positively, the AKC says [2]. Keep the dog calm with treats, as the AKC suggests for measuring sessions too [1]. Once the coat is in use, the AVMA suggests keeping more than one on hand so each outing starts with a dry one, because a wet garment makes a dog colder [3], and the AKC says to wash coats regularly because they collect hair and dander and can harbor bacteria if stored damp [2].

How to measure a dog for clothes: a five-minute routine

The three measurements are covered above. This is how to get numbers you can trust on the first try:

  1. Use a soft sewing tape, or string and a ruler, as the AKC suggests [1]. A metal tape bends at angles and gives a short reading.
  2. Stand your dog on a flat floor with weight on all four feet [1]. A sitting dog's back is curved and its chest is compressed, so both numbers come out wrong.
  3. Get a helper to hold treats at nose height. That keeps the head level, which matters for neck girth and back length.
  4. Measure each number twice. If the two readings differ by more than about half an inch, measure a third time and use the middle one.
  5. Lay the tape flat on the coat, not buried in it. For a fluffy dog, the tape should rest on the fur with two fingers' slack [1], because the coat will sit on that fur too.
  6. Write down inches and centimeters. Many charts on imported clothing list only centimeters.
  7. Weigh your dog while you're at it. Weight is a poor sizing guide on its own, but some charts use it as a tiebreaker.
MeasurementWhere the tape goesCommon mistakeNeeded for
Chest girthAround the widest part of the rib cage, usually just behind the front legs [1]Measuring right at the armpits, where the chest is narrowerCoats, sweaters, harnesses, life jackets
Back lengthBase of the neck (collar line) to the base of the tail, along the spine [1]Running to the tail tip, or following the curve of the sideCoats, sweaters, raincoats
Neck girth (clothing)Around the base of the neck where a collar sits [1]Measuring high under the jawPullover sweaters, turtlenecks
Neck (harness)The base of the neck where it meets the shoulders [4]Using the collar measurementHarnesses
Waist (optional)The narrowest point in front of the hind legsSkipping it on deep-chested breedsCharts that list it; checking belly straps

Waist is not one of the AKC's three core measurements; it helps for deep-chested, tucked-up breeds.

For long-necked breeds, the AKC notes that collars sit higher but should be measured lower on the neck, between the withers and where a standard collar rests [1].

How to measure chest girth on deep-chested and wide-chested dogs

Standard dog clothing assumes a body that is roughly the same width from chest to hips. Two common body types break that assumption.

Deep chest, narrow waist: Greyhounds, Whippets and other sighthounds

The AKC Greyhound standard calls for a chest that is "deep" and a loin "well cut up in the flanks" [7], and the AKC describes a severe tuck-up, the sharp rise from deep chest to narrow loin, as a feature of many sighthounds [8]. A coat sized to that chest hangs loose at the waist, slides sideways and can let cold air in under the belly.

  • Size by chest girth, then compare your waist measurement with the chart if it lists one.
  • Look for an adjustable belly strap or a cut designed for sighthounds, which narrows behind the ribs.
  • Check the neck opening: the standard calls for a long neck that widens into the shoulders [7], so a high collar needs to sit low enough not to ride up.

The AKC lists lean-bodied dogs such as Greyhounds, Whippets and Azawakhs among those that may need a winter coat [2], and its harness-fitting article suggests fleece lining for thin-coated breeds like Greyhounds to prevent chafing [9].

Wide chest, short back: Bulldogs

The AKC Bulldog standard describes a chest that is "very broad, deep and full", heavy shoulders set wide, a short, very thick neck and a short back [6]. On a standard chart, that chest girth lands a Bulldog in a size built for a much longer dog, so the coat drapes past the tail and bunches behind the legs.

  • Measure chest girth and back length, and choose the size where the chest fits; then check whether the back length is close.
  • If it's more than a couple of inches too long, look for a brand with a bulldog cut or a shorter body, rather than sizing down and squeezing the chest.
  • Measure neck girth carefully: a thick neck may not fit through a pullover sized by back length.

Long back, short legs: Dachshunds, Basset Hounds and Corgis

The AKC names these short-legged breeds among dogs that may need a coat [2]. Here back length drives the fit, while chest girth is modest. Size by back length and check that the leg openings sit where the legs are; on a long-bodied dog, a too-short coat leaves the lower back bare.

Body typeExample breedsSize byThen check
Deep chest, tucked waistGreyhound, WhippetChest girthWaist and belly-strap range
Wide chest, short backBulldogChest girthBack length and neck girth
Long back, short legsDachshund, Basset Hound, CorgiBack lengthChest girth and leg opening position
Average proportionsMost mixed breedsChest girthBack length

Body types from AKC breed standards and AKC coat guidance [2][6][7][8]; the sizing order is our rule of thumb.

How to measure for a dog harness

A harness needs different numbers from a coat. The AKC says chest girth and neck girth are the most important measurements for a harness [1], and its harness guide specifies the neck at its base, where it meets the shoulders, which is lower than a collar sits [4].

  1. Measure chest girth around the widest part of the rib cage, just behind the front legs [4].
  2. Measure the neck where it joins the shoulders [4].
  3. Keep the two-finger gap on both, so the harness won't tighten if your dog pulls [1].
  4. Check whether the chart lists your dog's measurements or the harness's own dimensions; the AKC notes brands do it both ways [1].
  5. If your dog falls between sizes, choose a model with more adjustment points [1].

Once it's on, the girth strap should sit behind the front legs without pressing into the elbows, and the neck opening should rest near the top of the breastbone, not on the throat [9]. If your dog will wear the harness under a coat, the AKC notes some jackets have a leash hole for a back-clip harness [2]; measure the dog for the coat with the harness on. Our no-pull harness guide covers fitting and putting one on step by step.

Between sizes: size up or down?

Size up on the chest, the AKC says [1]. But dogs are rarely between sizes on all three numbers at once, so it helps to know which one rules:

Where your dog falls between sizesWhat to do
Chest girthSize up [1]. A tight chest restricts the shoulders and can't be fixed with straps.
Back length only (chest fits one size)Go with the size the chest fits. A coat a little short of the tail base is fine; one far past it bunches and gets soiled.
Neck only, on a coat with closuresGo by chest; most neck closures adjust.
Neck only, on a pullover sweaterSize up: the neck opening has to pass over the head.
Every number is borderlinePick the style with the most adjustment, such as belly straps or hook-and-loop closures.

The chest rule is the AKC's [1]; the rest is our guidance from how each measurement affects fit.

For male dogs, the AKC suggests a slightly shorter underside if the coat has no belly cut-out, to avoid accidents [1]. That matters more when you size up, because a larger size usually has a longer belly panel too.

Why we don't print a dog coat size chart by weight

Generic charts that turn weight or breed into Small, Medium or Large are what the AKC warns against. It says sizing differs by brand and even by style within a brand [1], and the coats in our roundups show it: Carhartt's Large covers a 25 to 38 inch chest and its Extra Large 30 to 45 inches, so one dog can fit both on paper. Any "typical" chart we printed would be wrong for some coat you're about to buy.

Instead, fill in your dog's numbers once and hold them against each product's chart:

Your dogMeasurementChart's range for the size you're consideringFits?
Chest girth____ in / ____ cm____ to ____Inside the range, not at the top edge
Back length____ in / ____ cm____Within about an inch
Neck girth____ in / ____ cm____ to ____Inside the range (pullovers: not at the bottom edge)
Weight____ lb____Tiebreaker only

If the chest lands at the very top of a range, treat it as between sizes and go up [1].

Worked example: a dog with a 32-inch chest and 22-inch back looks at a chart where Large is 25 to 38 inches and Extra Large is 30 to 45. The chest fits both, but sits mid-range in the Large and near the bottom of the Extra Large, so the Large is the closer fit; check its listed back length against 22 inches before ordering.

Fit checks: coverage, movement and belly

The basic fit test is covered above. These are the specific things to look at with the coat on:

  • Coverage: for a short-haired dog, the ASPCA suggests a coat or sweater with a high collar or turtleneck and coverage from the base of the tail to the belly [5].
  • Girth straps: two fingers under each one with the dog standing, the same rule as for measuring [1].
  • Shoulders: walk your dog and watch the front legs reach forward; seams or straps across the front of the shoulder shouldn't shorten the stride.
  • Hind legs: the hem shouldn't catch the backs of the thighs when your dog trots or sits.
  • Belly on male dogs: the underside should stop short of the penis or have a cut-out, as the AKC suggests [1]; check after the first walk for dampness.
  • Harness opening: if the coat has a leash hole, check that it lines up with the harness ring, not halfway down the back [2].

Recheck the fit if your dog gains or loses weight or gets a haircut; the AKC gives the same advice for harnesses [4]. For puppies, remeasure every few weeks while they grow. If you're shopping now, our sweater guide covers lighter layers.

Dog coat and harness measuring FAQ

What measurements do I need for a dog coat?

Back length, chest girth and neck girth, per the AKC, with chest girth usually the most important [1]. Most charts list all three.

Where do I measure a dog's chest?

At the widest part of the rib cage, usually just behind the front legs, with the tape level and close and room for two fingers underneath [1].

How do I measure a dog's back length?

Along the spine from the base of the neck, where the collar sits, to the base of the tail [1]. Stop at the base of the tail, not the tip.

What if my dog is between sizes?

Choose the larger size, the AKC says [1]. Several brands say the same in their listings.

Can I size a dog coat by breed or weight?

Not reliably. The AKC says sizing differs by brand and even by style, so compare your dog's measurements with each product's chart [1]. Some makers, such as IECOii, size by chest girth only.

How do I know the coat fits once it arrives?

Your dog should be able to walk, run and play comfortably, and the coat should not be so loose it could tangle [2]. Try it indoors first, and introduce it gradually with treats rather than for the first time on a walk [2].

How do I measure a dog for a sweater vs a coat?

Take the same three numbers: chest girth, back length and neck girth [1]. Neck girth matters more for a sweater, because a pullover with no closures has to fit over the head, so if your dog is between sizes on the neck, size up. A coat that opens flat and fastens with straps is more forgiving at the neck, so chest girth decides it. Leave two fingers of slack on each girth [1].

Should I measure a dog over its fur?

Yes. Lay the tape on top of the coat, keeping it level and close, with room for two fingers underneath [1]. Don't press the tape down into thick fur to get a smaller number, because the coat or harness will sit on top of that fur too. The AKC says dogs with long or fluffy coats may need harness straps a little tighter to stop them slipping, and to recheck fit after grooming [4].

How do I measure a puppy for a coat?

Use the same method: chest girth behind the front legs, back length from collar line to tail base, and neck girth, all with the puppy standing [1]. Treats help keep a puppy still. Because puppies grow quickly, choose a coat with adjustable straps, size up when between sizes [1], and remeasure every few weeks. The AKC also advises rechecking harness fit after any weight change [4].

What is a dog's girth?

Girth is the distance around the body. For clothing and harnesses it usually means chest girth: around the widest part of the rib cage, normally just behind the front legs [1]. The AKC calls it the most important measurement for clothing and harnesses [1]. Neck girth is the distance around the base of the neck. Both are measured with two fingers of slack under the tape.

Sources

  1. American Kennel Club. How to Measure Your Dog for Clothes and Gear. akc.org
  2. American Kennel Club. Does My Dog Need a Winter Coat? Choosing the Best Winter Coat for Your Dog. akc.org
  3. American Veterinary Medical Association. Cold weather animal safety. avma.org
  4. American Kennel Club — Choosing the Right Harness for Your Dog (Maharaj N, updated 2026). akc.org
  5. ASPCA — Cold Weather Tips. aspca.org
  6. Bulldog Club of America — Official AKC Bulldog Breed Standard. bulldogclubofamerica.org
  7. Greyhound Club of America — American Kennel Club official standard for the Greyhound. greyhoundclubofamericainc.org
  8. American Kennel Club — The Importance of Tuck-Up (AKC Gazette, 2015; updated 2021). akc.org
  9. American Kennel Club — The Importance of a Well-Fitting Dog Harness (Johnstone G, 2022). akc.org